What underestimated for Tadelakt?

Tadelakt, an exceptional product

Tadelakt is a traditional Moroccan lime cover that has been used for centuries for the finishing of walls and floors in a variety of contexts, both inside and outside. The word «tadelakt» derives from the Arab verb of Tadlek, which means «rubbing» that the Tadelakt is made of limestone that is crushed, mixed with water and olive oil or animal fat, then covered on the surfaces. Once you have dried, the plaster is polite to create a smooth and brilliant finish. The thus formulated Tadelakt pebble app can be boring and requires a certain technicality.

Biologment has designed a Tadealkt made at the air lime for its finesse and ease of application, as well as the hydraulic lime for its strength and management of unequal humidity.

The load used and in extremely fine and white marble powder and without any animal derivative.

This selection allows to obtain a coating of coating of modern techniques, a high quality aesthetic technical product!

The implementation in the plate, much simpler and faster than the Pebble technique.

This coating is highly decorative but is also protective and is perfectly suitable for wet parts such as the Bagni Hammam Spa etc.

Choose the right background

To ensure an optimal grip, a special lime is essential under the biologist to biologist regardless of the vehicle. Composed of quartz, marble powders, silica and high quality binders, it is not a normal level below the level and its hooking power is remarkable. This is the essential product for a successful coating. Note that the preparation is essential and that this is a step not to be overlooked.

Also, be sure to respect the drying times, on average 24 hours.

Note: On unequal surfaces, remember to prepare your surface well and strengthen the preparation of the support with the wall mortar, make your surface homogeneous and more resistant to shock, cracks, to avoid the appearance of irregularities

Once the layer below is dry, apply a first layer of Tadelakt using an iron or stainless steel plate of 2 or 3 mm thick. When the first layer begins to change shadow, it is time to pass the second layer by tightening the material to obtain a waterproof and solid coating. Before the complete drying, you can smooth it with a plastic plate for a frozen and precious effect.

Once you get the desired level of shine, your Tadelakt is over! It is now ready to be appreciated for many years.

How to protect your Tadelakt?

After dried full of the last layer, it is highly recommended to pass the waterproof T to preserve the wear of wear and activity. It is the guarantee of its longevity.

You can also use a wax for additional protection, enlarge the Tadelakt and is also very useful for its maintenance.

To go further: